Famous sound tutorial/Organ

The Organ was very used in house music in the early 90s. The concept is simple. It consists of lots of oscillators at the same time but there is an infinity of versions. This tutorial is a basic. Slightly move the knobs to find your version.

Appears in

• Double You - Please Don't Go at 0:32

What you need

Pulverisateur

Heisenberg

2x Exciter

2x Reverb

2x Stereo Enhancer

Merger

How to get it

1. Open the application,
2. Add a pulverisateur,
3. Enable the oscillators 1, 2 and 3,
4. Put the octave of the oscillators 2 and 3 to -1,
5. Put a sin wave to the three oscillators,
6. Disable the synchronization to oscillator 1,
7. Disable the keyboard tracking,
8. For the filter envelop, set an attack to 0.998 ms,
9. Set a decay to 11.121 ms,
10. Set a sustain to 0.00%,
11. Set a release to 0.998 ms,
12. For the amplification envelop, set an attack to 0.998 ms,
13. Set a decay to 3.731 sec,
14. Set a sustain to 0.00%,
15. Set a release to 73.228 ms,
16. Link the pulverisateur to an exciter,
17. Put the tone to 30.24%,
18. Put the power to 12.50%,
19. Put the dry to -100.000%,
20. Link the exciter to a reverb pedal,
21. Put the room size to 92.75ms,
22. Put the pre-delay to 80.00,
23. Put the feedback to 16.67%,
24. Put the damping to 0.00%,
25. Put the level to 40.00%,
26. Link the reverb pedal to a stereo enhancer,
27. Put the tone to 51.17%,
28. Put the stereo enhancer to 100.000%,
29. Add a heisenberg,
30. Put the unisono amount to 2,
31. Set all the oscillators to a sinus wave,
32. Set the gain of oscillators A, B and C to 0.000dB,
33. Set the gain of oscillator D to -15.650dB,
34. Detune oscillator D to -12.000 semitones,
35. On the main envelope, set an attack time of 1.0 ms,
36. Set an attack bend of 22.04%,
37. Set an decay time of 2108.1 ms,
38. Set an decay bend of 100.00%,
39. Set a sustain of 0.00%,
40. Set a release time of 159.6 ms,
41. Set a release bend of 75.00%,
42. Set the volume to -9.987dB,
43. Link the heisenberg to an exciter,
44. Put the tone to 22.74%,
45. Put the power to 20.25%,
46. Put the dry to -56.295%,
47. Link the exciter to a reverb pedal,
48. Put the room size to 32.23ms,
49. Put the pre-delay to 80.00,
50. Put the feedback to 16.67%,
51. Put the damping to 0.00%,
52. Put the level to 40.00%,
53. Link the reverb pedal to a stereo enhancer,
54. Put the tone to 49.67%,
55. Put the stereo enhancer to 100.000%,
56. Connect the two stereo enhancers to a merger,
57. Play the same notes on the two synthesizers.

You should get an organ with a short delay.

Example

90s organ